Contax SW II - REV 4.01 Podręcznik Użytkownika Pobierz pdf (Strona 7)

AT-S73, AT-S99 and AT-S102 Version 4.0.1 Software Release Notes

PN 613-001136 Rev. B 7 Allied Telesis Inc.

2. In the IP Parameters Menu, do one of the following:

 To assign the card a static IP address configuration, enter the values in the IP address, Subnet

mask, and Gateway address fields. The values have to be entered in this format:

xxx.xxx.xxx.xxx.

 To assign the IP address configuration with a DHCP server on your network, select Enable DHCP

to activate the DHCP client. (There has to be a link on the 10/100Base-TX port on the card before

you can enable the DHCP client.)

3. If you enabled the DHCP client, wait for the menu to display the IP address assignment from the

DHCP server. If the management software displays an error message, go to “Troubleshooting the

Upgrade Procedure” on page 11.

4. Return to the Main Menu.

Phase 5: Configuring the TFTP Client

You must now configure the TFTP client on the management card by entering the IP address of the TFTP

server on your network as well as the filenames of the new management software programs stored on the

server. To configure the client:

1. From the Main Menu of the management card: do one of the following:

 For AT-S99 Version 3.0.0, select Configuration -> System Configuration -> TFTP Image

Download Configuration.

 For AT-S99 Version 4.0.0 or 4.0.1, select Configuration -> System Configuration -> System

Parameters Configuration -> TFTP Image Download Configuration.

2. In the TFTP Image Download Configuration window, select the TFTP Server IP Address field and

enter the IP address of the TFTP server on your network.

3. In the File Name fields, enter the filenames of the image files of the new management software files

you obtained from the Allied Telesis web site and stored on your TFTP server. Enter the filenames for

just those cards you want to upgrade in the chassis. Be sure to include the ".img" extension in the

filenames. The fields are defined here:

 Management Card - If you need to update the management module, enter in this field the

filename of the new AT-S99 Management Software stored on the TFTP server.

 AT-CM2x2 Image File Name - This field is for the image filename of the new AT-S73 Management

Software for the following line cards: AT-CM201, AT-CM202, AT-CM202/1, AT-CM202/2,

AT-CM212A/1, and AT-CM212B/1. All of these line cards use the same image file.

 AT-CM2Kx Image File Name - This field is for the image filename of the new AT-S73

Management Software for the AT-CM2K0S Line Card.

 AT-CM70x Image File Name - This field is for the image filename of the new AT-S73 Management

Software for the AT-CM70S Line Card.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Brak uwag

Contax SW II - REV 4.01 Podręcznik Użytkownika Strona 7